Home

Connect Barcode Scanners to Square

Ready to connect your own barcode scanner? Get started >

Learn how to connect and troubleshoot supported barcode scanners with the Square Point of Sale and Square for Retail Point of Sale.

Supported Barcode Scanners

USB Barcode Scanners are supported on iPads through the Square Stand, the Square Register or selected Android devices. If you are using an Android, your device must be running Android 7.0 software and support USB OTG (On-The-Go) or host mode. You’ll need a micro USB to USB adapter to connect the scanner to your device.

  • Zebra (Symbol) DS6707

  • Zebra DS9308

  • Zebra DS9908

  • Honeywell Hyperion 1300G

  • Honeywell Xenon 1900

  • Honeywell Voyager 1200G

  • Honeywell Voyager 1250G

  • Socket Mobile SocketScan S700 (Bluetooth)

  • Socket Mobile 7Ci (Bluetooth) Note: The Socket Mobile 7Ci is no longer being manufactured, but is still compatible with Square Point of Sale.

Bluetooth Barcode Scanners are currently only compatible with iPads and iPhones.

Connect Your Barcode Scanner

Bluetooth Scanners

To connect a Socket Bluetooth scanner to your iPad or iPhone:

  1. Turn on Bluetooth from your iOS settings.

  2. Tap the three horizontal lines to navigate to the menu, or tap More on the bottom right of Square Register.

  3. Tap Settings > Hardware > Barcode Scanner > Connect Barcode Scanner.

  4. Turn on the barcode scanner by holding the power button (small button) on the scanner until you hear two beeps (low to high).

  5. Scan the barcode below, or the barcode displayed on your Square Point of Sale screen, by holding the trigger button (large button) until you hear three beeps (low to high).

    Socket Mobile 7Ci iOS pairing barcode

  6. After you’ve successfully scanned the above barcode, tap Next on the dialogue screen.

  7. Return to the Bluetooth settings on your iOS device, and select the Socket scanner from available devices there.

  8. Navigate back to the Square app, and observe the on-screen prompts to complete the pairing flow.

USB Scanners

To get set up:

  1. Open the Square app on your device.

  2. Plug your barcode scanner into the Hub of your Square Hardware or into your Android device using an on-the-go (OTG) adapter.

  3. The app will notify you an accessory has been attached.

Unpair your Bluetooth Barcode Scanner

If you’d like to connect your Bluetooth Socket Mobile SocketScan S700 to a different iOS device, you’ll need to unpair the scanner from the current mobile device. To do so:

  1. Hold the trigger button (large button) and the Power button (small button) down together until you hear 3 beeps.

  2. Release both buttons.

To use the same barcode scanner with multiple devices, you have to delete Socket CHS from your iPad. Try the following tips:

  1. Go to your iPad settings and tap the barcode scanner from the list.

  2. Tap ‘Forget this Device’ > OK.

  3. Then pair the scanner to a different iPad or iPhone.

Troubleshoot Your Barcode Scanner

If you experience issues with your barcode scanner, try out the tips on our Barcode Troubleshooting article.

Can't find what you need?