Square Terminal Troubleshooting
General Troubleshooting
There is a list of basic checks you can do for many issues you may encounter with Square Terminal.
Please make sure to walk through the following before going through issue-specific troubleshooting steps:
Make sure your device is fully charged. Double check the battery symbol in the upper right-hand corner to see your battery level. You can fully charge your Square Terminal in under five hours.
Make sure your device’s date and time are accurate. If they are wrong, please update them via the Settings section. Select ≡ More > Hardware > General > Date and Time and adjust accordingly.
Make sure your account is activated. Square Terminal is only available in the United States, Canada, United Kingdom, Australia, Japan, Ireland, France and Spain at this time.
Make sure your device has the latest software. Square Terminal updates automatically overnight as long as it is powered on and plugged in.
Wi-Fi Troubleshooting
Toggle Wi-Fi off and on in More > Settings > Hardware > Network and check to make sure that you see a tick next to the network to which you are trying to connect. Confirm that you see the Wi-Fi status indicator on the top right corner of the status bar.
Keep in mind, you won’t be able to connect your Square Terminal to a captive portal network or unsecured networks. A captive portal is a network that requires you to agree to terms or conditions to access the internet connection (these networks are common at coffee shops, airports and other public internet access points).
Confirm that you have a strong Wi-Fi signal by checking other devices (such as phones, tablets or laptops) on your network near the location of your Square Terminal. The Wi-Fi status indicator in the upper right corner of the status bar should have 3–4 white bars to indicate a strong signal. Depending on the position of your router, you may need to move your Square Terminal closer to your router.
If you have an Ethernet connection available and have purchased
Hub for Square Terminal, switch to Ethernet by plugging in your Ethernet cable to the port on the hub.
Ethernet Troubleshooting
Confirm that you can see the Ethernet network status indicator in the top right corner of the status bar. If you don’t see the Ethernet network status indicator, try unplugging and plugging in the cable from the Ethernet port on the hub and from the router or modem.
Hub for Square Terminal Troubleshooting
To determine whether there is an issue with the hub or with the
USB hardware accessory (barcode scanner, printer), try connecting a different USB hardware accessory to the hub.
Payment Troubleshooting
- If you have Default to Customer Checkout enabled, confirm that you’ve pressed the ‘Confirm and Pay’ button to activate the customer display to accept contactless cards/phones. When your Square Terminal is ready to accept payments, you’ll see Tap, Insert or Swipe on your screen.
- It is also possible that the contactless card or NFC-enabled phone is damaged or broken. In this case, ask your customer to present a different form of payment.
- Ensure that chip and PIN cards are inserted with the chip facing up.
- If magnetic stripe and contactless payments still work, the chip may be damaged. In this case, ask your customer to present a different form of payment.
- It is also possible that, if magnetic stripe cards and contactless payments still work, something may have damaged the chip and PIN card slot. If you think this is the case, contact Square Support.
Reset your Terminal
On rare occasions, you may need to perform a factory reset. Don’t worry: resetting your device will not erase important account information like items, transaction histories, customer lists or employee permissions. It will all be there when you sign back in.
Before resetting your Terminal, please have the following information on hand since you’ll need it to log back in afterwards:
WiFi network name and password.
Account login information (email and password) or device code.
Location name, if applicable.
Accessory settings: printer stations, drawers and any other accessories. Recommendation is to take a picture of the configuration of each connected accessory.
It’s also a good idea to send a Diagnostic Report and Support Ledger from your device prior to factory resetting. Diagnostic reports and Support Ledgers contain essential logs that will help us diagnose and resolve issues faster.
To submit a diagnostic report and support ledger from your Square Terminal:
From the navigation bar at the bottom of your screen, tap More > Support.
Under Troubleshooting, tap Upload Support Ledger
Tap Send Diagnostic Report.
Once you tap Send Diagnostic Report, you can leave the screen and continue using your Terminal normally while the report is sent in the background.
Note: Diagnostic reports can take between two to seven minutes to upload – please ensure you have a strong internet connection and your device is powered on during this time.
To reset your Square Terminal:
Tap More.
Select Settings > Hardware.
Tap General > About Terminal.
Scroll to the bottom of the screen and tap Factory Reset > Confirm Factory Reset.
Tap Reset one last time. From here the countdown will begin and your Terminal will reset.
Note: If you’re unable to access the Terminal settings, hold down the power button for 10 seconds until you see a black screen with a count-down timer. Keep holding down the power button while the timer goes to 0 until the screen says you can release the power button.
Once the reset is complete, you’ll need to:
Go back through basic setup questions like your time zone.
Reconnect to the internet.
Sign back in with your email and password or device code.
Add accessories such as cash drawers, printers, scanners or scales. Learn more about connecting compatible hardware to Square Terminal.
Adjust any settings back to your preferences.
Network Requirements
If you enforce restrictions on what protocols and ports devices on your network can access, Square devices require the following protocols and their corresponding ports to be allowed through your firewall:
-NTP: This is critical for ensuring that the device has the correct time. Connectivity may fail due to certificate validity mismatches if the device time is wrong.
-HTTPS (only port 443): All traffic to Square servers is made over HTTPS.
The following ports are also used for network printers, but these do not require access to the internet:
-UDP: 22222, 3289
-TCP: 9100:9109
If you enforce restrictions on what domains can be accessed from within your network, Square devices require the following domains to be allowlisted.
HTTPS traffic
All subdomains of:
-squareup.com
-issquareup.com
-squarecdn.com
-cash.me
-cash.app
-squarecloudservices.com
As well as the following FQDNs:
-api.skyhookwireless.com
-notify.bugsnag.com
-sessions.bugsnag.com
-apytiqcuyrsq6-ats.iot.us-east-2.amazonaws.com
-square.site
-www.weebly.com
-api.mapbox.com
-mobile-data.onetrust.io
-privacyportal.onetrust.com
-cdn.cookielaw.org
-memfault-prod-east1.s3.amazonaws.com
-memfault-prod-ap-south-1.s3.amazonaws.com
-files.memfault.com
-device.memfault.com
-ingress.memfault.com
NTP traffic
NTP requires access to:
-time.android.com
Square’s IP address ranges are:
-US: 74.122.184.0/21
-Asia/Pacific: 103.31.216.0/22
-Europe: 185.57.56.0/22
Square devices also rely on access to Amazon Web Services (AWS) and Google Cloud Platform (GCP). AWS IP ranges are published
here, and Google is AS15169. Please add these IP ranges as well.
Note: Square devices have an internal firewall and an internal (domain, not IP) allowlist, and perform TLS certificate pinning on all Square endpoints, so you may consider the IP allowlisting on your side redundant depending on your purpose. It could make sense just to ensure Square devices can’t access any internal company IP addresses and leave the rest of the internet open for Square’s on-device firewall and domain filter.
Square’s MAC OUI: 44:59:25
Merchants should allowlist all MAC addresses that start with the above prefix (i.e. devices with MAC addresses following the pattern 44:59:25:XX:XX:XX). Alternatively, merchants can allowlist each individual device that shows up with that MAC address prefix (this prefix is owned by Square and should not be used by any other device vendors).
If you have older Square hardware, you may need to also allowlist the following MAC prefixes:
Older MAC OUIs: 2C:D1:41:D, 8C:47:6E:5, 1C:59:74:6
Cleaning your Terminal
For minor scuffs and marks, you can use any electronic cleaning cloth.
To clean the reader on Square Terminal, you can use card reader cleaning cards or a folded paper towel. Slide the cleaning card or paper towel through the card reader slot to clear any spills or debris.
If you are still having trouble, please give our Support Team a call and we can help get you back to business.
Printer troubleshooting
Make sure the printer is configured correctly. To get started:
From your Terminal, tap Settings > Hardware > Printer.
In the Use this printer for section, ensure at least one option is toggled on.
Tap Print test to make sure the printer works.
Note: Verify that printer paper is thermal printer paper. Terminal will not print on non-thermal printer paper.
Make sure there is a paper roll in the printer and printer cover is fully closed. You need to double check the receipt printer paper orientation. If the receipt paper is loaded incorrectly, receipts will not print.
Make sure that the printer door is closed.